Hi, this is Jennifer and I am so excited to be the creative guest today. I have this little blog, called A Happy Circus where I write about a mish mash of everything crafty and beautiful. From sewing to scrapbooking to cooking, if it's light, airy, beautiful, ruffly, vintage or pink than I am happy. The circus part is trying to raise four children while doing all of the above. But I wouldn't have it any other way. My life is definitely a happy circus.
Grab your favorite pair of chuck taylors and let's get started!
You will need:
E 6000 (a very strong glue in a tube found at your local craft store or Walmart)
coordinating ribbon (for the shoe laces)
swaravski flat back crystals size 7ss or 9ss (4-6 bags of 144 each) (I got mine on Ebay).
sharp point tweezers
plate (for squeezing glue onto. If using styrofoam or paper, put a thick magazine underneath)
mini snickers unwrapped (great for popping in your mouth since you will be sitting for a while)
First, come up with your design. You can sketch it onto the shoe with a pencil, or you can freehand it like me. Spread out the crystals you will need. Make sure the room is well ventilated since the glue has toxic fumes.
With your toothpick, you can apply the glue to the back of the crystal or you can dip the back of the crystal into the glue.
Place your crystal onto the shoe. Don't worry about the glue strands. You can pull those off with tweezers when it dries.
Pat the crystal into place with the back of tweezer or your finger. Repeat, repeat, repeat, repeat. If necessary take many breaks. The whole process takes a few hours. When finished let dry for 24 to 72 hours to "cure". Then add your favorite ribbon and enjoy!
Don't have a princess in your life? You can bling cell phones, laptops... and anything else you can dream up. Just make sure it is not an area near the mouth, you don't want a baby ingesting the chemicals.
Thanks for having me!!
And you're welcome to visit me at A Happy Circus anytime! - Jenn