I am so thrilled to be a creative guest here on UCreate.
I love this site and feel like so much of my inspiration is found here.
Thanks Kari, for this opportunity!
My name is Kristyn, and I've been married to my smokin' hot hubby for almost 5 years!! I have 2 kids and one on the way, and LOVE that they bring me so much happiness. I started my blog called Lil' Luna to archive all the ideas and crafts I have made or found, and have now turned it into a place where ANYONE can find fun, easy, and inexpensive crafts, tips, recipes, home decor items and everything else you can think of. Come on over and check it out! :D
TODAY, I will be showing you how to make a
CUTE, INEXPENSIVE & FUN
MAGNETIC CHORE CHART
For under 10 BUCKS!
Here is what you'll need...
-Wood (10x15 inches)
-Wood Block (Approx. 1.75x6 inches)
-Chipboard piece (11x17 inches)
-2 pieces of scrapbook paper PER chart
-Sheet Metal (Found mine at Home Depot for .99 - in Roofing section)
-Accent/Plant Gems ($1 at Dollar Tree)
-Chore pics (clipart included)
-Hot Glue Gun
-Tacks (optional - at Lowe's - 24 pk. for $1)
1. Begin by spray painting your piece of sheet metal with spray enamel (or you can leave it unpainted cuz it looks cute both ways!) Let dry.
2. When sheet metal is dry, add your vinyl to the sheet metal or you can paint/stencil or use marker to add the T chart on yourself. Spray with 2 coats of Polyurethane to make sure paint won't chip off of the sheet metal. Let dry.
3. Trace onto the BACK of your chipboard the design you want it to have. I made mine have scalloped edges for my daughter's, and just a simple straight edge for my son's.
4. Mod Podge scrapbook paper to the FRONT of your chipboard paper. You will need two pieces to cover the whole piece. Let dry.
5. To make magnets you will need to cut circles around your chore clip art, and then mod podge them to the flat backs of the accent gems. Let dry. Once dry add magnet strip or small magnet to back.
6. When chipboard is dry, cut out your pattern from the back. You will then hot glue this to your piece of wood, making sure it is center. Also be sure to add hot glue to the chipboard piece and not the sheet metal because it will dry too fast to stick.
7. Add your ribbon to the back of your wood. I do this by turning the board over, marking the very center top, and then measure two inches on each side. Staple the ribbon on the 2 inch marks and tie a square knot (right over left, left over right).
8. When sheet metal is dry, hot glue this to your scrapbook paper/chipboard in the center. Be sure to hot glue the paper and not the back of the metal or the hot glue will dry before you can put them together.
9. Paint wood blocks or wood rectangle where your child's name will be. Let dry. Once dry add name to the blocks with vinyl or you can paint or stencil it on.
10. To make sure the sheet metal sticks well, add tacks to the four corners of the sheet metal.
11. Hot glue name block(s) to the top center of your board.
12. Add embellishments and magnets to your board. I added flowers using a flower punch and buttons. You can add anything you'd like from punches to scrapbook items, and you're done. :)
What's great is not only is it cute and inexpensive, but your child will love doing his chores when they know they can help move the magnets/pics to the other side of the chart!
AND it's even cheaper if you make them in bulk or if you get your girlfriend's together to make them. Gotta love it!!
You May Also Like…