Raggedy Scallop Baby Quilt Tutorial

Reggedy Scallop Quilt Tutorial
I can’t wait to show you my latest quilt I created!
This month I used the Riley Blake fabric Apple of My Eye and made a Raggedy Scallop Baby Quilt with a full tutorial just for you. ENJOY!
Raggedy Scallop Baby Quilt Tutorial

Let’s get started!

Supply List:

2 yards Apple of My Eye-Basket {Pink}

1/2 yard Apple of My Eye-Petals {Pink}

1/2 yard Apple of My Eye-Stripe {Pink}

1/2 yard Apple of My Eye-Dot {Yellow}

1/2 yard Apple of My Eye-Floral {Yellow}

1/4 yard Riley Blake Basic Solids {Pepper}

1 yard Jumbo Ric Rac Teal

and basic sewing essentials.

Start out by cutting 2 pieces of Apple of My Eye- Basket {Pink} at 40” x 28”. This is the main body of the baby quilt. I call these the front panel and the back panel throughout this tutorial. {The back panel is the one with all the scallops!}
Now, grab a circle about the size of scallops you want. I used the bottom of a planter I just bought that has 5” radius. Then I traced half of the circle on freezer paper over and over to create the scallops.
Creating the scallops template Baby Quilt Creating the scallops Tracing
Cut it out and iron it to the fabric to cut your first of 25 scallop strips. I used the first fabric strip as my stencil from here on out. I didn’t want to keep ironing the freezer paper to the fabric. . I did 5 of each fabric design.
Cut Scallops Baby Quilt Tutorial
Iron them all nice and flat and put 4 aside for the front panel. Get ready to spend a fair amount of time with a pile of your straight pins. You are going to pin 20 scallop strips to your back panel.
Pinning the scallops
I grabbed a ruler and made sure I had the first strip straight all the way across. However, I eyeballed the other strips occasionally measuring to make sure they were going still straight and not diagonal. You don’t want to have them going crooked...on accident, anyway. {It might be cute to do them all at an angle though.}
Now for the sewing!
Ready to sew Baby Quilt Tutorial
Start at the top and zigzag stitch the first strips. Remove the pins, fold the strip up to get those scallops out of the way and zigzag stitch the next strip. Remove the pins, fold the strip up and begin again...and again. Do this on all 20 strips.
Fold it up and keep sewing Fold up and Keep sewing Roll as you go! Baby Quilt Tutorial
I folded the strips up and rolled them in so that I was not “wrestling the quilt top” the whole time. It’s a serious party when you get to the last strip; trust me!
All scallops sewn on Baby Quilt tutorial
Unroll and iron it all out nice and pretty. Put that back panel aside and let’s work on the front panel of the baby quilt.
Front Panel Scallops
Double sided Scallops
You are going to take 4 of your extra scallop strips and place them right sides together. Pin and sew the top (straight edge) and the scalloped edge. Leave the sides open so you can turn the whole thing right side out. Once you have it turned right side out iron it really well...it might take a bit of manipulating to make sure those scallops lay right. Then top stitch the scallops ⅛” seam. Set this finished double-sided scallop strip aside and make another one! These will go on the front of the quilt.
Front panel with Double Scallops
Place one strip 12 ½” from the bottom of the front panel and the other 13” from the bottom. Again make sure they are straight all the way across.
Sewn D scallop strips
Zigzag stitch the top of each double-sided scallop strip, starting with the bottom one.
Front finished
Place the Jumbo Ric Rac on top and zigzag stitch it in place (using matching thread). Stand back and admire your finished front panel...Now for the fun part.
Back Panel…AGAIN! Now we are going to sew the scalloped edges of the back panel we were working on earlier. We don’t want them hanging there and fraying like crazy every time you wash it, right?
Adding batting BABY QUILT TUTORIAL
Start by taking your batting and cutting it to fit the back panel exactly. Now put some safety pins in it; we don’t want the batting to move and bunch while you are sewing ALL these raw edged scallops. {NOTE: DO NOT PIN THE FRONT PANEL TO THE BACK AT THIS POINT. I knew that if I sewed the raw edge scallops to the front panel at this point I would sew through onto the double-side scallops and I wanted those to be free and hanging...and it would look pretty silly to sew over top of those. I promise this will make sense as you go.} Here’s a photo explanation:
Don't stitch on the D Scallops
Now that that’s clear, let’s keep going.
Sewing the raw edge
Start zigzag sewing ¼” seam on the raw edge of the scallop that hits 13 ½” from the bottom (on the back panel, of course). You are going to do the same thing on the scallops below that one until you hit 10” from the bottom. {NOTE: That is if you put your double-sided scallops where I did on the front. If not, sew down the raw edge scallops on the back where your double-sided ones will lay on the front.}
Pin everything! Start sewing raw edges.
Now lay the back panel, batting, and front panel together and PIN THE HECK OUT OF IT. I used safety pins because I knew I would be wrestling the quilt while sewing the zigzags around each scallop strip and I really didn’t want to get pinned with a million straight pins. I have enough of those injuries already. Let the wrestling begin!
Riley Blake Quilt 012
You are just going to zigzag stitch ( ¼” seam) all the raw edge scallops starting at the very top and working your way down. I know it sounds daunting, but I got this done in about 2 hours...give or take a couple of interrupting children. You will use the same technique of rolling the quilt as you go as to keep it somewhat out of your way.
When you sew that last raw edge, shake it out and iron it. Take pride in seeing it all come together...you are working hard.
square it 2
Now square it off and make sure the edges are measuring straight. When I was done squaring it off the quilt was measuring 39 1/4” x 27 1/2”.
Ready to start binding!
It is time to bind your masterpiece...this part scared the heck out of me since I have never done it before. So I did what any good girl would do and I called my mommy. She walked me through it step by step and I am proud to say I did it ALL BY MYSELF.
HOWEVER, There is a FABULOUS tutorial under the Cutting Corners tab at the top of the Riley Blake website, called Binding Basic Tutorial by Deonn Stott. This is exactly how I did my binding. Follow it and you will be well taught!
Riley Blake Quilt 016
Now that your quilt has binding, take a sharp, small pair of scissors and cut the scallop edges a bit to help create a great raggy look. Throw it in the washer starting on the rinse cycle (no soap). Let it spin and throw it in the dryer. When it’s done take and iron to it and give it to a beautiful baby...like this!
Lilly Collage

becky bio





You May Also Like…
houndstooth quilt[4] Modern Monogram Quilt[5]

Houndstooth Quilt

Modern Monogram Quilt




























Pin It

9 comments:

  1. Love your scalloped quilt!

    ReplyDelete
  2. The quilt is deelish and the faric is awesome.

    ReplyDelete
  3. 28" wide seems awfully small for the width of the quilt. Is that really how wide you made it? I am getting my supplies all ready to make this, but I am just a little confused at the sizing of the main body pieces.

    ReplyDelete
    Replies
    1. Yeah, the finished size is 26 1/4" wide. You can absolutely take the same technique and make it bigger. I would love to see your finished project!

      Delete
  4. This is THE cutest thing I've seen in a long time. BY FAR the cutest! I love it:) Way to go!

    ReplyDelete
  5. Just a quick question. If you used the same single template to cut them all it would look from symetrical.
    Did you then stagger them to the left and right and trim the excess off to create a more organic feel?

    Thanks. I cannot wait to make this one!!

    ReplyDelete
  6. Super cute quilt, the recipient is truly one lucky gal!

    ReplyDelete
  7. I'm in. Looks challenging, doesn't it?

    ReplyDelete
  8. Very cute!! What kind of foot did you use on your sewing machine?

    ReplyDelete

01 09 10