DIY Baby Gown Sewing Tutorial

 

 

DIY Baby Gown sewing tutorial

I love decorating onesies for baby shower gifts.  These outfits provide a personal touch and a one-of-a-kind baby gift.  Decorating a onesie can be as simple or as complicated as your creative skills will reach. 

For this particular DIY baby gift tutorial, I bought a newborn onesie, 1/4 yard of red fabric and 1/2” elastic.

DIY Easy Baby Shower Gift

1.  Cut 2 rectangles at 8” x 15”.  If you want more ruffle at the top {where you sew it to the onesie} then make the rectangle wider.  The length is perfect for those tiny newborn bodies.

2. Sew both rectangles together by placing right sides together and sewing down the long sides. Use a 1/2” seam allowance.

3.  Serge (or zigzag stitch) to avoiding fraying fabric.

4.  Press the seams and top-stitch {like I did in this Nightgown Tutorial}, if you’d like. 

DIY newborn gown tutorial

5.  Serge (or zigzag) the bottom to avoid fraying fabric.

6.  Fold the bottom up a little over half an inch. Press with hot iron.

7.  Hem the bottom edge: I put two pins in the hem where to mark the “no sew zone”.  This is the zone you will leave open for the elastic.  Start sewing at one pin and stop when you get to the other pin. Sew near the top of your serged edge to make sure you have plenty of room for the elastic to go around.

DIY one-of-a-kind baby gown

8.  Cut a 14” long piece of your 1/2” wide elastic.  Put a safety pin in one end and work it into the hem/casing.

9.  Pull the elastic all the way around the bottom until the ends meet.

10.  Overlap the elastic 1/2” and stitch the ends together securely.

11.  Tuck the sewn piece inside the “no sew zone” and sew the hole shut.  Now the bottom hem is done!

DIY onesie gown for newborn

12.  Serge (or zigzag) the top edge and turn it under 1/2”.

13. Sew the top edge about 1/8” from the edge.

14.  Set your machine to sew the largest/loosest stitch (basting stitch) and sew just under the first stitch.  Leave plenty of thread where you stopped. 

15.  Pull your threads of the loose stitch you just made to create a gather. 

16.  Work the material all the way around until you have the gather you want.

DIY Baby Gown onesie

17.  Slide the little onesie into the gathered top.

18.  Pin into place.

19.  Undo the snaps of the onesie so it slides onto the arm of your machine.

20.  Using a normal stitch {not the loose one you made earlier}, stitch all the way around the gown piece under the loose stitch.

21.  Pull the loose stitch out completely by pulling on the long threads you pulled on to create the gather in the first place.  This time however, you are going to just rip them completely out.  And now you are completely done!

Baby Onesie Tutorial

This would be a really cute gift just by itself, but throw in a matching headband or booties and you have a whole newborn ensemble.

Posted by:

becky bio

Pin It

No comments:

Post a Comment

01 09 10