DIY Halloween Costume Party Awards - dollar store craft!

 

DIY COSTUME PARTY AWARDS ucreateparties.com

Every year I host a HUGE costume party for my family.  {It is only huge because my family is huge.}  You must have a costume to even come through the door…I am serious!  It pays to wear a great costume to the party because I hand out awards and movie gift cards!  This year I am not only handing out gift cards, but each recipient gets a Skeleton Statue. 

I found the inspiration for these awards as I was walking around the dollar store and came upon a mini skeleton garland.   Enjoy the tutorial…and please help with my question at the end!

DIY Halloween Party Awards supplies

Supply List:

For Skeletons:

-Skeleton Garland from Dollar Tree

-4 small wooden dowels

-4 small wooden platforms (scavenge the garage)

-Krylon Metallic Gold Spray Paint

-drill with drill bit the size of dowels

For Decorating Skeleton:

-Xyron “X” Create-a-Sticker Machine

-thin white grosgrain ribbon

-computer, printer, paper

-Felt, pom-poms, etc

-glue gun

 

Instructions:

Put the dowels in a cardboard box (or right into the grass) and slip the skeletons on the dowels.

Spray with the Krylon Metallic Gold Spray Paint.

DIY Halloween Party Awards 1 DIY Halloween Party Awards 2

While the paint is drying, let’s work on the wooden platforms.

Stain the wood by using a foam brush and painting the stain on.  Use an old rag and wipe it off.  {For a darker stain leave the stain on longer and then wipe it off.}

DIY Halloween Party Awards 3

When your stain dry drill a hole in the base of each platform.  I didn’t do the hole in the middle of the base, I wanted the skeletons to be more toward the back so I could doll up the base if I felt like it. 

DIY Costume Party Awards

Okay, now we can assemble everything!

Put a drop of hot glue on the end of the wooden dowel and slide it into the hole you made on the base. 

Slide the skeleton on the dowel and hot glue its spine to the dowel. {Make sure to remove those pesky hot glue strings.} Glue its feet to the base as well.

Now to make the sashes! You are going to PRINT ON RIBBON! This is so easy.

DIY Halloween Party Awards 7

Type up whatever awards you plan to give out.  Use a bold font, hit enter twice between each award, and center the text.  Print it out.  This will be your guide as to where you place the ribbon.

Printing on ribbon tutorial

Cut your ribbon into 5 inch strips.

Feed two of them through your Xryon Sticker Maker {side by side} according to manufacture instructions.

Rub the ribbon a bit so the adhesive sticks to it really well.  Peel off the transparent piece and gently peel off the ribbon.

Place the sticky side of the ribbon on the paper over your words.

Once you have done this to all the ribbon pieces, put the paper back through the printer.  This time the words will have printed right on top of the ribbon.  {I know, your mind is blown, right?}

DIY Halloween Party Awards 11

Gently pull up the ribbon.  If the paper rips a bit that is fine.  Just take the paper off the back of the ribbon and drape across you skeleton. 

DIY Halloween Party Awards 12

The ribbon was still sticky enough to stick to the front of the skeleton.  However, I did put a dab of hot glue in the back to secure the sash.

 DIY Halloween Party Awards 13

Aren’t they looking so cute?!  You could leave them like this or doll them up a bit.  I chose to doll them up with various crafting items I had collected.

DIY Halloween Party Awards 14  DIY Halloween Party Awards Funniest

The SCARIEST award is a witch costume made with black felt and a glue gun.

The FUNNIEST award is a clown costume made with a white pom-pom, a red pom-pom and a hot glue gun.

The LEAST EFFORT award is just sitting there with no costume…that was easy!

DIY Halloween Costume Awards

Now here is where I need your help!  What in the world do I do to decorate the BEST OVERALL Skeleton? How would you decorate him? I can’t wait to hear your ideas!

DIY Halloween Party Awards Best Overall

 

Post By…

becky bio

 

Other Halloween Ideas on UCreate…

How to Make a Yarn Wig

Pizza Costume Tutorial

Pin It

15 comments:

  1. Put a small pair of overalls on him.

    ReplyDelete
  2. How many skeletons came on the garland? Paint 3 or 4 gold & lay them on the wood piece (in a pile). Then use a longer dowel on your Best Overall Skeleton. When he is standing up he will be OVER ALL the other skeletons! (lame, I know! But funny!)

    ReplyDelete
  3. Lol! Too cute! Who wouldn't want one of these?

    ReplyDelete
  4. How about parts from a bunch of different costumes? For example, a witch hat, super hero cape, clown nose, and wrap his legs like a mummy.

    ReplyDelete
  5. These are the best!

    ReplyDelete
  6. These are the best!

    ReplyDelete
  7. This is the cutest idea! Thank you for giving me an idea for my Halloween party.

    ReplyDelete
  8. A gold or blingy crown. Maybe red robe, like a king.

    ReplyDelete
  9. Love them going to try the ribbon thru the printer have always just made paper ones thank u

    ReplyDelete
  10. Wouldn't double sided sticky tape work as well? (For the ribbon that is)

    ReplyDelete
    Replies
    1. I am sure it would. I have never tried it with the tape...I just use the xyron machine.

      Delete
  11. I like the idea of a king's crown and robe. You could also put a small jack o'lantern, tombstone or other halloween decoration on the base.

    ReplyDelete
  12. I agree that a king's crown and robes would be awesome! You could also add a jack o'lantern, tombstones, or other halloween decorations to the base.

    ReplyDelete
  13. Wow these are so fun!

    ReplyDelete

01 09 10