Embroidery Hoop Thread Rack Tutorial
Supplies
Embroidery hoops (one for each thread rack)
1/8″ dowels
Wood glue
Blade
Instructions
1- Start by cutting the dowels down. For my spools, I cut 3 1/4″ pieces. For my bobbins, I cut 1 1/2″ pieces. To start, just make an indentation with the blade all the way around the dowel, then snap.
2- Loosen the fastener at the top of the hoop as much as possible without screwing it all the way out. This should leave you with enough space for the dowels. For spacing purposes, place dowels on the top, bottom, and sides- think 12 o’clock, 3 o’clock, 6 o’clock, and 9 o’clock.
3- The spaces in between the dowels are going to be tighter, so you’ll want to put your next dowel in right next to one of the dowels you already had in place, and then slide it over. Spread dowels around the hoop fairly evenly, then you can space them perfectly even.
4- Once the hoop is set up how you’d like it, set it upside down on some newspaper and place a small amount of wood glue at each joint. Start with a small amount of glue, and if you decide you need more later, you can go back and re-glue it. Let dry.
Dear Emmeline says
very cute idea!
Pat says
Best idea ever. If you get gradating sizes, you can hang them inside of each other! THANKS
w says
what a great idea! oh my goodness!
zeynep says
very cute..
DazedandCreative says
Awesome idea!
betty loechel says
Perfect! I am going to pint my hoop and use some twigs that I recently painted and wondered what I could do with them…now I have an idea. Great job, thank you for sharing 🙂
Mel M. M. McCarthy says
Too brilliant. Love how easy it is!
Aukse says
Such a wonderful idea! 🙂
Christina at I Gotta Create! says
Fantastic idea!
<3 Christina
Katrine says
Good idea! I was just thinking I needed to nail some holes in boards for my thread, but I’m intrigued! Great idea!
WinnibriggsHouse says
What a top idea! Have some unloved embroidery hoops, will def be giving that a go.
La Pecora Nera says
Great idea! Thank you to share:-)
Emanuela
Betty says
I would cut the dowel 4 inches long to accommodate both the spool of thread and matching threaded bobbin; keeping them together.
Karen says
I totally agree! I’m also going to do smaller hoops inside a large one so I can maximize my storage amount. I’m excited to do it. Thanks for sharing!